10% Off Your First Order - Use Code SPFIRST10, FREE Tracked Delivery on orders over £35
Menu
Search Search Cart
0
Cart

Smelly Pigs Wax Melts Tips & Safety

Smelly Pigs Wax Melts

Smelly Pigs wax melts should only be used in appropriate wax melt warmers. Add one piggie at a time until the required melted wax fill is reached. Do not overfill the wax melt burner initially as the wax will spill over. If wax remains in the warmer bowl after use and you wish to remove it, wait until the wax cools and hardens, then apply a small amount of gentle pressure on one end of the wax until it pops out. Do not use metal or sharp objects to clean out wax as this may crack or damage the burner or cause injury.

Wax Melt Warmer (non-electrical)

For maximum scent throw and longevity we recommend a tea light warmer around 8 - 10 cm tall with a 4 hour soy tea light.

Failure to follow these instructions could result in a fire hazard.

  • Never leave a burning candle unattended or move it when lit.
  • Remove all packaging before use.
  • Only use with a good quality tea-light. Do not use with a maxi tea-light, votive or other candles.
  • Keep the Wax Melt Warmer and tea-light out of the reach of children and pets.
  • Do not burn the tea-light or leave the wax melt warmer on or near anything that can catch fire.
  • Ensure the wax melt warmer is well ventilated. There must be at least 6.5cm of space above the flame within the wax melt warmer.
  • Keep foreign objects out of the wax pool.
  • Keep the wick trimmed to 3-5mm and remove any carbon build up.
  • The wax melt warmer becomes very hot during use, do not touch or move whilst alight or whilst wax remains molten.
  • Extinguish the tea-light if the flame becomes enlarged, makes contact with the wax melt warmer, or begins to smoke.
  • Use a candle snuffer to extinguish the flame. Once extinguished allow wax melt burner to cool before moving.

Direction for Use

  • Place the wax melt warmer on a level, flat, cool, heat-resistant surface away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the wax melt warmer is used without a protective plate, tray or similar product.
  • Position the wax melt on the top bowl of the wax melt warmer.
  • Insert a tea-light in the bottom base of the wax melt warmer.
  • Allow the heat of the tea-light to melt the wax and fragrance will release into the room. The wax melt warmer will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the warmer to cool completely before touching or moving.
  • Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst a tea-light is still lit. This could cause the wax melt warmer to scorch and (or) smoke.
  • If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, apply a small amount of warm water to soften the wax and then whilst using protective gloves gently place pressure on one end of the wax to pop the wax out.
  • Let the wax melt warmer completely cool before re-use.
  • DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE WARMER. DO NOT PLACE THE WARMER IN A FREEZER.
  • WAX MELT WARMERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.

Electric Wax Melt Warmer

For maximum scent throw and longevity we recommend an electrical wax warmer with a minimum power of 40w.

Failure to follow these instructions could result in a fire hazard.

  • Never leave an electric wax melt warmer unattended whilst in use.
  • Remove all packaging before use.
  • Keep the electric wax melt warmer out of the reach of children and pets.
  • Do not leave the electric wax melt warmer on or near anything that can catch fire.
  • Ensure the electric wax melt warmer is well ventilated. Keep foreign objects out of the wax pool.
  • The electric wax melt warmer becomes very hot during use, do not touch or move whilst turned on or whilst wax remains molten.

Direction for Use

  • Place the electric wax melt warmer on a level, flat, cool, heat-resistant surface away from other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the electric wax melt warmer is used without a protective plate, tray or similar product.
  • Position the wax melt on the top bowl of the wax melt warmer.
  • Plug in the electric wax melt warmer and switch it on.
  • Allow the heat of the bulb to melt the wax and fragrance will release into the room. The electric wax melt warmer will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the warmer to cool completely before touching or moving.
  • Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst the electric wax melt warmer is switched on. This could cause the electric wax melt warmer to scorch.
  • Switch off the electric wax melt warmer and unplug from the mains when not in use.
  • If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, then whilst using protective gloves apply a small amount of gentle pressure on one end of the wax to pop the wax out.
  • Let the electric wax melt warmer completely cool before re-use.
  • DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE WARMER. DO NOT PLACE THE WARMER IN A FREEZER.
  • ELECTRIC WAX MELT WARMERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.